New Release: GSM&WiFi Alarm System
Hot Sale! Hot Sale! Hot Sale!
GSM&WiFi Alarm System
2.4 inch TFT display screen, concise user interface and menu hint design.
Main interface status bar, date/clock indication, fairly obvious alarm host status.
Built-in powerful performance CPU master based on 32-bit Cortex-M3 core.
Based on uCOS - III operating system with multitasking design, great user operation experience.
WIFI/GSM/3G/GPRS intranet alarm system, support different alarm channels, like APP push/SMS/voice monitoring/intranet center etc. to ensure the alarm performance stable and reliable.
Support SMS alarm/disalarm and voice alarm/disalarm
Support up to 88 learning/storage location for remote control, RFID cards and wireless detector.
Support many defense zones, such as gate, SOS, bedroom, window, balcony, perimeter, smoke, gas, carbon monoxide, water leaking, etc.
Support the main power malfunction, backup power shortage, tamper alarm and other extended alarm.
Support entry/exit zone, indoor zone, perimeter zone, 24-hour zone.etc.
Up to 5 groups preset alarm phone numbers, SMS on/off and dial on/off can be set respectively.\
Support external wireless siren.
Support timing arm and disarm.
Can store and inquire daily operation records and alarm records.
GSM network clock synchronization, to ensure accurate clock, and support country time zone setting.
Support multi-language menu display, voice prompts and alarm SMS setting.
Can record 10/20 seconds voice message and alarm voice.
Telephone function, support 5 groups re-dial number.
User-friendly APP operation experience and user interface.
Push Arm/disarm message to APP
Support APP remote arm/disarm, parameter setting and accessory management.
Online GPRS to obtain equipment status, automatic alarm when offline.
Reserved remote GPRS TCP / UDP protocol channel, compatible with multiple alarm center networking protocol to facilitate network alarm.
Center remote control.
Identification for daily operation
set security task (i.e. Anti-burglar), make the host into alert state, also known as Alarming, Alert or Booting. Designate security guard mission(i.e. Anti burglar), set the alarm host into on-guard status, also called Arming, Alert or Power on.
In case the user is at home, only set alert to entrance/exit or perimeter(also called Home Alert).
Withdraw security task(i.e. Anti-burglar)( also called Withdraw alert or Power off)
Under Alarm state, detector detects someone or when door is opened, it will trigger the detectors and make alarms.
After setting the host machine to be Alarm state, the alarm time can be delayed in order to avoid making alarms for the users leaving and passing the Alarm zones.
When user comes back and pass the Alarm zones, the host will not immediately make alarms. It will allow users some time to Disalarm the host ; the host will make alarms if time is up for Disalarm.
When the host machine activate alarm action, acousto -optical alarm signal arises. The host will send SMS message to the preset mobile phone, dial the preset user telephone number, create push to mobile phone APP, or send alarm information to intranet security center.